PLURITANK ultrasonic cleaning line
PLURITANK is Novatec's modular multi-chamber ultrasonic cleaning line. Process stations for ultrasonic cleaning, rinsing and drying are combined to suit the part, the contamination and the required cleanliness, with up to 14 process stations per line.
PLURITANK family overview
Modular multi-tank ultrasonic cleaning line. Built from separate process modules - ultrasonic immersion or spray cleaning, cascade rinsing, hot air and vacuum drying - so the line is configured to the job. Configurable tank volume from 50 to 1,500 litres with up to 14 process stations. Stainless steel throughout, PLC and HMI control, automatic basket handling from 10 kg to 300 kg and above.
Typical use
Cleaning tools and components before PVD coating and other vacuum treatments. Final cleaning before sterilisation and packing.
Key features
- Modular, up to 14 process stations, with room for future hardware and software upgrades
- Configurable tank capacity from 50 to 1,500 litres
- Multi-frequency ultrasonic groups
- User-friendly HMI with multiple programs
- Data exchange and traceability
- AISI 304/316 stainless construction
- Factory acceptance test with your sample parts
Supported processes
Industries
Automotive, Medical devices and implants, Optics and eyewear, Watches, jewellery and decorative, Semiconductor and electronics, Cutting and gear cutting tools, PVD coating service providers, Dies and mould manufacturers, Steel and metal processing, Aerospace and defence, Power: wind, solar and thermal, Oil and gas
Technical data
| Configuration | Configurable modular multi-tank ultrasonic cleaning line |
|---|---|
| Tank volume range | 50 to 1,500 litres per tank (built to order based on part size) |
| Process stations | Up to 14 process stations per line |
| Ultrasonic technology | Multi-frequency ultrasonic groups (in-house Italian design & manufacture) |
| Available process stages | Ultrasonic immersion, spray wash, multi-stage cascade DI water rinsing, passivation, hot air & vacuum drying |
| Basket load capacity | 10 kg to 300+ kg per basket with automatic robot transporter |
| Material construction | AISI 304 / AISI 316 stainless steel throughout |
| Control system | Siemens PLC with touchscreen HMI, multi-program recipe management & data traceability |
Manufacturer figures; exact values depend on the configuration.
PLURITANK 1400 — Multi-Stage Process Line Layout
Process station sequence, ancillary utilities & layout footprint (Novatec GA drawing 5298.3.0-26CO)
Key dimensions
| Internal tank | 700 × 1200 × 1650 h mm (approx. 1386 litres) |
|---|---|
| External basket | 540 × 1090 × 1540 h mm |
| Line footprint | 19500 × 7000 mm |
| Width options | Supplied in two overall widths. The tank size is the same in both. |
Ancillary equipment & utilities
- General control board
- WT1 buffer tank, filter holder and pump
- Two pump and filter groups
- DEMI 100/4 demineralised water plant
- Exhaust fan
- CS1 loading and unloading operators zone
| Position | Station Description | Process Notes |
|---|---|---|
| C | Motorised loading conveyor | Infeed load station |
| 1 | Ultrasonic cleaning tank with basket agitation | Primary ultrasonic wash |
| 2 | Rinsing tank with turbulent flow | Turbulent flow rinse |
| 3 | Ultrasonic cleaning tank with basket agitation | Secondary ultrasonic wash |
| 4 | Rinsing tank with turbulent flow | Intermediate cascade rinse |
| 5 | Ultrasonic cleaning tank with basket agitation | Final precision ultrasonic wash |
| 6 | Rinsing tank with turbulent flow | Cascade flow rinse |
| 7 | DI water ultrasonic rinsing tank | Demineralised ultrasonic rinse |
| 8 – 9 | DI water rinsing tank with slow drain system | Cascades back to tank 7 |
| 10 – 14 | Hot air tunnel dryer | 5 drying positions |
| S | Motorised unloading conveyor | Outfeed unload station |